Supermicro MBD-X11SPH-nCTF-O

Key Features 1. Intel® Xeon® Scalable Processors, Single Socket P (LGA 3647) supported, CPU TDP support 205W 2. Intel® C622 chipset 3. Up to 1TB ECC 3DS LRDIMM, up to DDR4-2666MHz; 8x DIMM slots 4. Expansion slots: 1 PCI-E 3.0 x16 (x16 || x8), 1 PCI-E 3.0 x8 (x0 || x8), 1 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8) 5. 2 10GbE LAN ports 6. 10 SATA3 (6Gbps) via C622 7. 8 SAS3 (12Gbps) via Broadcom 3008; RAID 0, 1, 10 8. 2x Port NVMe PCI-E 3.0 x4 via OCuLink 9. 5 USB 3.0 (2 rear, 1 Type-A, 2 via header), 8 USB 2.0 (2 rear, 6 via headers) 10. I/O: 1 VGA, 2 COM, TPM header Physical Stats Form Factor ATX Dimensions 12" x 9.6" (30.48cm x 24.38cm) Processor/Cache CPU Intel® Xeon® Scalable Processors. Single Socket P (LGA 3647) supported, CPU TDP support 205W Cores / Cache Up to 28 cores System Memory Memory Capacity 8x 288-pin DDR4 DIMM slots, Up to 1TB ECC 3DS LRDIMM, Up to 512GB ECC LRDIMM, Up to 256GB ECC RDIMM Memory Type 2666/2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 288-pin RDIMM/LRDIMM DIMM Sizes RDIMM: 4GB, 8GB, 16GB, 32GB, LRDIMM: 32GB, 64GB, 3DS LRDIMM: 64GB, 128GB Memory Voltage 1.2V Error Detection Corrects single-bit errors On-Board Devices Chipset Intel® C622 SATA Intel® C622 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,5,10, Broadcom® 3008 SW controller for 8 SAS3 (12Gbs) ports; RAID 0,1,10 IPMI ASPEED AST2500 Network Controllers Dual LAN with 10GBase-T with Intel® X722 + X557 Graphics Aspeed AST2500 BMC Input / Output SATA 10 SATA3 (6Gbps) port LAN 2 RJ45 10GBase-T ports USB 8 USB 2.0 ports (2 rear + 6 headers), 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) Video Output 1 VGA port Serial Port / Header 2 COM Ports (1 rear, 1 header) TPM TPM Header Expansion Slots PCI-E 1 PCI-E 3.0 x16 (x16 or x8 ), 1 PCI-E 3.0 x8 (x0 or x8 ), 1 PCI-E 3.0 x8, 1 PCI-E 3.0 x4 (in x8 slot) M.2 Interface: PCI-E 3.0 x4 and SATA, Form Factor: 2280 System BIOS BIOS Type AMI UEFI BIOS Features ACPI 6.0, RTC (Real Time Clock) Wakeup, SMBIOS 3.0 or later Management Software Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SPM, SUM, SuperDoctor® 5, Watchdog Power Configurations ACPI Power Management, Power-on mode for AC power recovery PC Health Monitoring Voltage +1.8V, +12V, +3.3V, +5V, +5V standby, 3.3V standby, 8 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility, VBAT FAN 8x 4-pin fan headers (up to 8 fans), Fan speed control, Overheat LED indication, PWM fan speed control, System level control Temperature CPU thermal trip support, PECI LED CPU / System Overheat LED, UID/Remote UID, Suspend static indicator LED Other Features ACPI power management, Control of power-on for recovery from AC power loss, RoHS, UID, WOL